Interpretation of the core content of the standard
Terminology system framework
The standard has constructed a terminology system with 9 major categories and 5 major technical dimensions:
- Lifting and lateral movement equipment: storage and retrieval through lifting and translation of the carrier plate
- Aisle stacking equipment: three-dimensional spatial positioning using stackers
- Newly added new energy related terms such as charging parking space
Key technical changes
Technical dimensions | 2011 version | 2021 version | Update points |
Safety protection | 9 terms | 12 terms | Added classification requirements for fall protection devices |
Drive system | Category 3 drive | Category 4 drive | Added toothed belt forced drive |
Smart device | Not covered | 5 AGV terms | Definition of comb-tooth/clamp-type AGV |
Implementation suggestions
Key points of design and application
- Equipment classification should strictly refer to the 9-category classification standard in clause 3.1
- Safety device configuration must meet the 12 protection types required in chapter 3.4
- Parameter annotation should use the unified size of suitable vehicles for parking terms in chapter 3.8
Standardized application case
Correct use of a smart garage project in technical documents:
- Describe "transport robot" as Automated guided vehicle for parking(3.3.16)
- Mark Leveling accuracy≤±5mm as required by 3.8.20
- According to clause 3.2.3, quasi-unmanned mode operation is clearly adopted
Technology Evolution Analysis
This standard reflects the three major development trends of parking equipment technology:
- Intelligent: Add AGV-related terms to adapt to unmanned development
- Safety Enhancement: Improve safety terms such as fall prevention and misentry detection
- New Energy Adaptation: Add definitions of new facilities such as charging parking spaces