R42 港口通信与导航 标准查询与下载

DB43/T 1718-2019 遥控自动破玻逃生装置

Remote control automatic glass breaking escape device

IEC 61162-1:2016 海上导航和无线电通信设备及系统. 数字接口. 第1部分: 单通话器和多方收听器

This part of IEC 61162 contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This part of IEC 61162 is intended to support one-way serial data transmission from a single talker to one or more listeners. These data are in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this standard are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, this standard should be used with caution in all safety applications. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2. For applications to shore based equipment of the automatic identification system (AIS) reference should be made to the IEC 62320 series.

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners

BS EN ISO 14819-3:2013 智能运输系统. 借助于交通信息编码的交通和出行信息. 广播数据系统的定位基准. 用ALERT-C的交通信息频道 (RDS-TMC)

Intelligent transport systems. Traffic and travel information messages via traffic message coding. Location referencing for Radio Data System. Traffic Message Channel (RDS-TMC) using ALERT-C

BS EN ISO 14819-2:2013 智能交通系统.经过交通电文编码的交通和旅行信息电文.无线电数据系统用事件和信息代码.使用ALERT-C交通电文信道(RDS-TMC)

Intelligent transport systems. Traffic and travel information messages via traffic message coding. Event and information codes for Radio Data System. Traffic Message Channel (RDS-TMC) using ALERT-C

DB35/T 164-2013 汽车维护工艺规范

本标准规定了汽车车型分类、维护分级、工艺过程、维护周期、质量保证期、维护作业和竣工检验 内容及技术要求。 代表车型、同类车型汽车的变型车和其他类型的汽车参照执行。

Automobile maintenance process specification

IEC 61162-1:2010/COR1:2013 海上导航和无线电通信设备及系统. 数字接口. 第1部分: 单通话器和多方收听器; 勘误表1

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners; Corrigendum 1

BS ISO 24102-5:2013 智能运输系统. 陆地移动用通信信道 (CALM). 智能运输系统站务管理. 快捷服务广告协议 (FSAP)

Intelligent transport systems. Communications access for land mobiles (CALM). ITS station management. Fast service advertisement protocol (FSAP)

BS ISO 15638-1:2013 智能运输系统. 管制的商业货运车辆 (TARV) 协同远程信息处理应用软件框架. 框架和架构

Intelligent transport systems. Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV). Framework and architecture

BS ISO 13183:2013 智能运输系统. 陆地移动用通信信道 (CALM). 使用广播通信

Intelligent transport systems. Communications access for land mobiles (CALM). Using broadcast communications

IEC 61162-1:2010 海洋导航和无线电通信设备和系统.数字接口.第1部分:单通话器和多受话器

This part of IEC 61162 contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This part of IEC 61162 is intended to support one-way serial data transmission from a single talker to one or more listeners. This data is in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this standard are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, this standard should be used with caution in all safety applications. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2.

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners

IEC 61162-1:2007 海上导航和无线电通信设备和系统.数字接口.第1部分:单通话器和多受话器

This part of IEC 61162 contains the requirements for data communication between maritime electronic instruments, navigation and radiocommunication equipment when interconnected via an appropriate system. This standard is intended to support one-way serial data transmission from a single talker to one or more listeners. This data is in printable ASCII form and may include information such as position, speed, depth, frequency allocation, etc. Typical messages may be from about 11 to a maximum of 79 characters in length and generally require transmission no more rapidly than one message per second. The electrical definitions in this standard are not intended to accommodate high-bandwidth applications such as radar or video imagery, or intensive database or file transfer applications. Since there is no provision for guaranteed delivery of messages and only limited error checking capability, this standard should be used with caution in all safety applications. For applications where a faster transmission rate is necessary, reference should be made to IEC 61162-2.

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners

AASHTO PG06-2007 医生的咨询手册,根据第106条的民族古籍保存法

Section 106 of the National Historic Preservation Act of 1966 (NHPA) requires Federal agencies to take into account the effects of their actions on historic properties. The NHPA created the Advisory Council on Historic Preservation (ACHP) and authorized

AASHTO Practitioner's Handbook - Consulting Under Section 106 of the National Historic Preservation Act Revision 1

AASHTO M 240-2007 混合水硬性水泥的标准规范

This specification pertains to five classes of blended hydraulic cements for both general and special applications, using slag or pozzolan, or both, with portland cement or portland cement clinker or slag with lime.

Standard Specification for Blended Hydraulic Cement

AASHTO PP 50-2007 惯性剖面仪操作和评价路面断面标准

This practice describes the procedure for operating and verifying the calibration of an inertial profiler. This practice is meant to be performed as a Quality Assurance (QA) test for use with the appropriate smoothness specification for paving operation

Standard Practice for Operating Inertial Profilers and Evaluating Pavement Profiles

AASHTO M 170M-2007 钢筋混凝土制涵管、雨水管、污水管规格(米制)的标准规范

This specification covers reinforced concrete pipe intended to be used for the conveyance of sewage, industrial wastes, and storm water, and for the construction of culverts.

Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)

AASHTO M 247-2007 交通涂料用玻璃珠的标准规范

Standard Specification for Glass Beads Used in Traffic Paints

Standard Specification for Glass Beads Used in Traffic Paints

AASHTO PP 49-2007 惯性剖面系统的认证

Standard Practice for Certification of Inertial Profiling Systems

Standard Practice for Certification of Inertial Profiling Systems

AASHTO T 22-2007 圆柱形混凝土试件的抗压强度的试验方法

This test method covers determination of compressive strength of cylindrical concrete specimens such as molded cylinders and drilled cores. It is limited to concrete having a unit weight in excess of 800 kg/m3 (50 lb/ft3).

Standard Method of Test for Compressive Strength of Cylindrical Concrete Specimens

AASHTO T 49-2007 沥青材料的渗透性试验方法

This practice describes minimum performance requirements for inertial profilers to be used for quality control/quality assurance (QC/QA) of surface smoothness on Owner-Agency paving projects where the profile-based smoothness construction specification

Standard Method of Test for Penetration of Bituminous Materials

AASHTO M 315-2007 使用橡胶垫圈的混凝土管和人孔用接头规格(米制)的标准规范

Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets

Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets